P49

A German-made reciprocating triplex plunger pump.

Features:
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; nitrile seals (with fabric reinforcing); stainless steel valves and forged brass manifold.

  • P49 Exploded View
  • P49 Parts List
  • P49 Torque Specifications

Sorry, there are no accessories associated with this product.

  • Giant Industries Limited Warranty
  • P49 Installation Instructions
  • P49 Repair Instructions
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
1420 RPM
Max Flow 2.7 GPM 10.2 L/min
Max Discharge Pressure 2200 PSI 150 bar
Max Inlet Pressure 145 PSI 10 bar
Plunger Diameter 0.71″ 18 mm
Stroke 0.41″ 10.0 mm
Max Temp 160 °F 70 ºC
Crankshaft Diameter .0.71″ 18 mm
Crankcase Capacity 8 fl. oz. 0.24 L
Weight 13.9 lbs. 6.3 kg
Inlet Ports (2) 1/2″ BSP
Discharge Ports (2) 3/8″ BSP
Shaft Rotation Top of Pulley Towards Manifold
Shaft Mounting Either Side
Volumetric Efficiencty @ 1420 RPM 0.96 0.96
Mechanical Efficiency @ 1420 RPM 0.8 0.8
Key Component Material
Manifold Forged Brass
Plungers Solid Ceramic Oxide
Valves High Grade Stainless Steel
Seals Nitrile With Fabric Reinforcing
Gear End Aluminum

 

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 1000 PSI 1500 PSI 1700 PSI 2200 PSI
745 1.4 0.97 1.5 1.6 2.1
910 1.7 1.2 1.8 2.0 2.6
1140 2.2 1.5 2.3 2.69 3.3
1305 2.5 1.7 2.6 2.9 3.8
1420 2.7 1.9 2.8 3.2 4.1

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100


*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09038
31 07241 V-Sleeve 3
40 07234 O-Ring 3
Complete Plunger Packing Kit – Part #09081
31 07241 V-Sleeve 3
40 07234 O-Ring 3
50 07239 Rear V-Sleeve 3
51 07240 Support Ring 3
Ceramic Plunger Assembly Kit – Part #09539
24A 07021 Ceramic Plunger 3
24B 08456 Tension Screw 3
24C 07676 Copper Ring 3
25 06648/13333* Flinger 3
*13333 is needed for P46W pumps with brass retainers (p/n 08064)
Valve Assembly Kit – Part #09039
34 07325 Spring Retainer 3
35 06017-0100 Valve Spring 3
36 06016 Valve Plate 3
37 06014 Valve Seat 3
38 06015 O-Ring, Valve Seat 3
40 07234 O-Ring, Adapter 3
42 12004 O-Ring, Inlet Plug 3
44 07035 O-Ring, Discharge Plug 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.