
GP5145
A German-made reciprocating triplex plunger pump.
Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; nitrile seals with fabric reinforcing; stainless steel valves and nickel-plated Spheroidal cast iron manifold.
View Manual
-
Share
Request Info
How to Order
SPECIFICATIONS
U.S. | Metric | |
---|---|---|
Flow | 43.5 GPM | 164.6 L/min |
Maximum Discharge Pressure | 1450 PSI | 100 bar |
Crankshaft Speed | 750 RPM | |
Power Required | 45 hp | 33.6 kW |
Maximum Inlet Pressure | 145 PSI | 10 bar |
Maximum Temperature | 140 °F | 60 °C |
Plunger Diameter | 1.77″ | 45 mm |
Stroke | 1.81″ | 46 mm |
Crankshaft Diameter | 35 mm | |
Crankshaft Rotation | Top of Pulley Towards Manifold | |
Crankshaft Mounting | Either Side | |
Inlet Ports | (2) 1-1/2″ NPT | |
Discharge Ports | (2) 1″ NPT | |
Crankcase Oil Capacity | 1.21 gal | 4.6 L |
Weight | 179 lbs. | 81 kg |
Key Component Material | ||
Manifold | Nickel-Plated Spheroidal Cast Iron | |
Plungers | Solid Ceramic Oxide | |
Valves | Stainless Steel | |
Seals | Nitrile with Fabric Reinforcing | |
Gear End | Spheroidal Cast Iron |
HORSEPOWER SPECIFICATIONS
RPM | GPM | 725 PSI | 1000 PSI | 1200 PSI | 1300 PSI | 1450 PSI |
---|---|---|---|---|---|---|
400 | 23.2 | 11.6 | 16.0 | 19.2 | 20.8 | 23.2 |
500 | 29.0 | 14.5 | 20.0 | 24.0 | 26.0 | 29.0 |
600 | 34.8 | 17.4 | 24.0 | 28.8 | 31.2 | 34.8 |
650 | 37.7 | 18.9 | 26.0 | 31.2 | 33.8 | 37.7 |
700 | 40.6 | 20.3 | 28.0 | 33.6 | 36.4 | 40.6 |
750 | 43.5 | 21.8 | 30.0 | 36.0 | 39.0 | 43.5 |
Horsepower Requirements
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
REPAIR KITS
ITEM# | PART# | DESCRIPTION | Qty. |
---|---|---|---|
Plunger Packing Kit – Part #09228 | |||
35A | 13286 | O-Ring | 3 |
35B | 08183 | O-Ring | 3 |
36 | 13290 | Grooved Ring | 3 |
40 | 13294 | V-Sleeve | 6 |
Inlet Valve Assembly Kit – Part #09231 | |||
46A | 12055 | O-Ring | 1 |
46B | 08059 | O-Ring | 1 |
46C | 13304 | Valve Seat | 1 |
46D | 13306 | Valve Plate | 1 |
46E | 13307 | Valve Spring | 1 |
Discharge Valve Assembly Kit – Part #09232 | |||
47A | 13289 | O-Ring | 1 |
47B | 07700 | O-Ring | 1 |
47C | 13314 | Valve Seat | 1 |
47D | 13306 | Valve Plate | 1 |
47E | 13307 | Valve Spring | 1 |
Complete Valve Repair Kit – Part #09812 | |||
46A | 12055 | O-Ring | 3 |
46B | 08059 | O-Ring | 3 |
46C | 13304 | Inlet Valve Seat | 3 |
46D | 13306 | Valve Plate | 3 |
46E | 13307 | Valve Spring | 3 |
46F | 13308 | Spring Tension Cap | 3 |
46G | 13309 | Spacer Pipe | 3 |
47A | 13289 | O-Ring | 3 |
47B | 07700 | O-Ring | 3 |
47C | 13314 | Discharge Valve Seat | 3 |
47D | 13306 | Valve Plate | 3 |
47E | 13307 | Valve Spring | 3 |
47F | 13308 | Spring Tension Cap | 3 |
48B | 07740 | O-Ring | 3 |
Oil Seal Kit – Part #09230 | |||
31 | 13284 | Oil Seal | 3 |
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.