BP100

A German-made reciprocating triplex plunger pump for bentonite applications.

Features:
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; high temperature Nitrile seals with fabric reinforcing; stainless steel valves and forged brass manifold.

  • BP100 Exploded View
  • BP100 Parts List
  • Giant Industries Limited Warranty
  • BP100 Installation Instructions
  • BP100 Repair Instruction
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Flow 5.9 GPM 22.4 L/min
Maximum Pressure 1885 PSI 130 bar
Crankshaft Speed 750 RPM
Maximum Temperature 194 ºF 90 ºC
Plunger Diameter 1.02″ 26 mm
Stroke 0.79″ 20 mm
Crankshaft Rotation Top of Pulley Towards Manifold
Crankshaft Mounting Either Side
Inlet Ports (2) 3/4″ NPT
Discharge Ports (2) 1/2″ NPT
Crankcase Oil Capacity 24 fl oz 710 ml
Weight 41.9 lbs. 19 kg
Key Component Material
Manifold Forged Brass
Plungers Solid Ceramic Oxide
Valves Stainless Steel
Seals High Temperature Nitrile With Fabric Reinforcing
Gear End Aluminum

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 500 PSI 1000 PSI 1500 PSI 1885 PSI
250 2.0 0.7 1.4 2.0 2.6
350 2.8 0.9 1.9 2.8 3.6
450 3.5 1.2 2.4 3.7 4.6
550 4.3 1.5 3.0 4.5 5.6
650 5.1 1.8 3.5 5.3 6.6
750 5.9 2.0 4.1 6.1 7.7

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100

*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09649
31 11503 V-Sleeve 6
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
Valve Assembly Kit – Part #09069
34 07325 Discharge Spring Retainer 3
34A 07326-0100 Inlet Spring Retainer 3
35 07312-0100 Valve Spring 6
36 07327 Valve Plate 6
37 06014 Valve Seat 6
38 06015 O-Ring, Valve Seat 6
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
44 07214 O-Ring, Discharge Plug 3
Oil Seal Kit – Part #09797
26 07318 Radial Shaft Seal 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.