A German-made reciprocating triplex plunger pump for high temperature applications.
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; high temperature nitrile seals (with fabric reinforcing); stainless steel valves and forged brass manifold.
WARNING: This product might contain a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|Maximum Flow||3.2 GPM(194 GPH)||12.2 L/min(733 L/hr)|
|Maximum Pressure||870 PSI||60 bar|
|Maximum Temperature||220° F||104° C|
|Maximum Flow||3.9 GPM (233 GPH)||14.7 L/min (882 L/hr)|
|Maximum Pressure||870 PSI||62 bar|
|Maximum Temperature||195 °F||90 °C|
|Plunger Diameter||0.787″||20 mm|
|Crankhaft Rotation||Top of Pulley Towards Manifold|
|Crankshaft Mounting||Either Side|
|Inlet Ports||(2) 1/2″ NPT|
|Discharge Ports||(2) 3/8″ NPT|
|Crankcase Oil Capacity||12.5 fl oz.||0.37 L|
|Weight||17.2 lbs.||7.8 kg|
|Key Component Material|
|Plungers||Solid Ceramic Oxide|
|Valves||High Grade Stainless Steel|
|Seals||Nitrile With Fabric Reinforcing|
|RPM||GPM||500 PSI||700 PSI||870 PSI|
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
|Plunger Packing Kit – Part #09457|
|31A||06537||High Temperature Seal||3|
|42||07214||O-Ring, Inlet Plug||3|
|44||07035||O-Ring, Discharge Plug||3|
|50||08358||Grooved Seal Ring||3|
|Valve Assembly Kit – Part #09458|
|34||05593||Retainer, Valve Spring||6|
|35||06017-0100||Valve Spring, SS||6|
|38||06015||O-Ring, Valve Seat||6|
|Oil Seal Kit – Part #09202|
|26||07206||Crankcase Oil Seal||3|
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.