P204-4120

WARNING: This product might contain a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

  • P204-4120 Exploded View
  • P204-4120 Parts List
  • P204-4120 Technical Drawing

Sorry, there are no accessories associated with this product.

  • Giant Industries Limited Warranty
  • P204-4120 Installation Instructions
  • P204-4120 Repair Instructions
  • Troubleshooting Guide
  • How it Works

SPECIFICATIONS

U.S. Metric
Flow 1.8 GPM 6.8 L/min
Maximum Pressure 3200 PSI 220 bar
Power Required 4.0 BHP 3.0 kW
Crankshaft Speed 1450 RPM
Plunger Diameter 0.47″ 12 mm
Stroke 0.56″ 14.1 mm
Crankshaft Diameter 0.98″ 24 mm
Key Width 0.31″ 8 mm
Crankshaft Mounting Either Side
Crankshaft Rotation Top of Pulley Towards Manifold
Temperature of Fluids 140 ºF 60 ºC
Inlet Ports (2) 1/2″ BSP
Discharge Ports (2) 1/4″ BSP
Weight 13.9 lbs. 6.3 kg
Crankcase Oil Capacity 9.5 fl. oz. 0.28 L
Key Component Material
Manifold Special Brass
Plungers Solid Ceramic Oxide
Valves High Grade Stainless Steel
Seals Nitrile With Fabric Reinforcing
Gear End

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 500P SI 1000 PSI 2000 PSI 3200 PSI
725 0.9 0.31 0.62 1.2 2.0
900 1.1 0.38 0.76 1.5 2.4
1200 1.5 0.52 1.0 2.1 3.3
1450 1.8 0.62 1.2 2.5 4.0

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100


*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Seal Packing Kit – Part #09711
22 06717 Seal Ring, Gray 3
22A 05858 Seal Ring, Black 6
23 07770 O-Ring 9
26 05861 Rod Seal 3
27 05862 Guide Band 3
29 08416 O-Ring 3
30 05864 Rod Seal 3
39 05871 O-Ring 3
40 12017 O-Ring 3
Oil Seal Repair Kit – Part #09144-0010
19 08356-0010 Oil Seal 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.