LP601

A German-made reciprocating triplex plunger pump.

Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; nitrile seals with fabric reinforcing; stainless steel valves and machined stainless steel manifold.

Sorry, there are no accessories associated with this product.

  • Giant Industries Limited Warranty
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Flow 9.8 GPM 37 L/min
Maximum Discharge Pressure 5800 PSI 400 bar
Crankshaft Speed 1000 RPM
Power Consumption 38.8 HP 28.9 kW
Maximum Inlet Pressure 145 PSI 10 bar
Maximum Temperature 140 °F 60 °C
Plunger Diameter 0.79″ 20 mm
Stroke 1.57″ 40 mm
Crankshaft Diameter 35 mm
Crankshaft Rotation Top of Pulley Towards Manifold
Crankshaft Mounting Either Side
Inlet Ports 1-1/4″ BSP
Discharge Ports 1″ BSP
Crankcase Capacity 118 fl. oz. 3.5 L
Weight 125 lbs. 56.5 kg
Key Component Material
Manifold Stainless Steel
Plungers Solid Ceramic Oxide
Valves Stainless Steel
Seals Nitrile With Fabric Reinforcing
Gear End Spheroidal Cast Iron

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 3000 PSI 4000 PSI 5000 PSI 5800 PSI
500 4.85 10.1 13.5 16.8 19.4
640 6.2 12.9 17.2 21.5 24.8
750 7.28 15.2 20.2 25.3 29.1
805 7.8 16.3 21.6 27.1 31.2
865 8.4 17.5 23.3 29.1 33.6
940 9.1 18.9 25.2 31.6 36.4
1000 9.7 20.2 26.9 33.7 38.8

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100


*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09763
36 13037 Seal Ring 3
38 07140 O-Ring 3
38A 13241 Support Ring 3
39 13012 O-Ring 3
39A 13036 Support Ring 3
40 07783 Packing 6
Valve Assembly Kit – Part #09794
44A 07150 O-Ring 9
44B 06266 Support Ring 3
46A 06920 Valve Seat 6
46B 04641 Valve Ball 6
Oil Seal Kit – Part #09577
31 07133 Oil Seal 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.