
LP1000
A German-made reciprocating triplex plunger pump.
Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; zirconia oxide ceramic plungers; aramid packing; stainless steel valves; machined stainless steel manifold and piping for cooling the seals.
View Manual
-
Share
Request Info
How to Order

WARNING: This product might contain a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
SPECIFICATIONS
U.S. | Metric | |
---|---|---|
Flow | 3.4 GPM | 12.8 L/min |
Maximum Discharge Pressure | 15,000 PSI | 1000 bar |
Crankshaft Speed | 1000 RPM | |
Maximum Inlet Pressure | 145 PSI | 10 bar |
Maximum Temperature | 104 °F | 40 °C |
Plunger Diameter | 0.47″ | 12 mm |
Stroke | 1.65″ | 42 mm |
Crankshaft Diameter | 1.38″ | 35 mm |
Crankshaft Rotation | Top of Pulley Towards Manifold | |
Key Width | 0.38″ | 10 mm |
Crankshaft Mounting | Either Side | |
Inlet Ports | (2) 1/2″ BSP | |
Discharge Ports | (2) 1/2″ BSP | |
Crankcase Capacity | 118 fl. oz. | 3.5 L |
Weight | 115 lbs. | 52 kg |
Key Component Material | ||
Manifold | Machined Stainless Steel | |
Plungers | Zirconia Oxide Ceramic | |
Valves | Duplex Steel | |
Seals | Aramid Packing | |
Gear End | Spheroidal Cast Iron |
HORSEPOWER SPECIFICATIONS
RPM | GPM | 7250 PSI | 10000 PSI | 12250 PSI | 15000 PSI |
---|---|---|---|---|---|
600 | 2.0 | 10.6 | 14.6 | 17.9 | 21.9 |
700 | 2.4 | 12.3 | 17.0 | 20.8 | 25.5 |
800 | 2.7 | 14.1 | 19.4 | 23.8 | 29.1 |
900 | 3.1 | 15.8 | 21.9 | 26.8 | 32.8 |
1000 | 3.4 | 17.6 | 24.3 | 29.8 | 36.4 |
Horsepower Requirements
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
REPAIR KITS
ITEM# | PART# | DESCRIPTION | Qty. |
---|---|---|---|
Plunger Packing Kit – Part #09517 | |||
35 | 08598 | Grooved Ring | 3 |
38 | 06590 | Sleeve Support Ring | 3 |
39 | 06591 | Spiral Ring | 3 |
43 | 06595 | Border Seal Ring | 3 |
45 | 06560 | O-Ring | 6 |
47 | 07740 | O-Ring | 3 |
Valve Assembly Kit – Part #09518 | |||
48 | 07750 | Valve Spring | 3 |
49 | 06598 | Inlet Valve Plate | 3 |
50 | 06599 | Valve Body | 3 |
51 | 12092 | O-Ring | 3 |
52 | 06600 | Support Ring for O-Ring | 3 |
53 | 06601 | Border Seal Ring | 3 |
55 | 06603 | Spring Guide | 3 |
56 | 12090 | Valve Spring | 3 |
57 | 06604 | Discharge Valve Plate | 3 |
Oil Seal Kit – Part #09577 | |||
31 | 07133 | Oil Seal | 3 |
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.