BP6150

A German-made reciprocating triplex plunger pump for bentonite applications.

Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; rope packing; stainless steel valves and Spheroidal cast iron manifold.

  • BP6150 Exploded View
  • BP6150 Parts List
  • BP6150 Torque Specifications
  • Giant Industries Limited Warranty
  • BP6150 Installation Instructions
  • BP6150 Repair Instructions
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Flow 42.3 GPM 160 L/min
Maximum Pressure 1450 PSI 100 bar
Crankshaft Speed 600 RPM
Power Consumption 43.8 HP 32.7 kW
Maximum Inlet Pressure 145 PSI 10 bar
Maximum Temperature 104 ºF 40 ºC
Plunger Diameter 1.97″ 50 mm
Stroke 1.89″ 48 mm
Crankshaft Diameter 45 mm
Crankshaft Rotation Top of Pulley Towards Manifold
Key Width 0.47″ 12 mm
Crankshaft Mounting Either Side
Inlet Ports (2) 2-1/2″ BSP
Discharge Ports (2) 1-1/4″ BSP
Crankcase Oil Capacity 1.1 gal 4.2 Liters
Weight 260 lbs. 118 kg
Key Component Material
Manifold Spheroidal Cast Iron
Plungers Solid Ceramic Oxide
Valves Stainless Steel
Seals Rope Packing
Gear End Spheroidal Cast Iron

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 250 PSI 500 PSI 750 PSI 1450 PSI
100 7.1 1.2 2.5 3.7 7.1
200 14.1 2.4 4.9 7.3 14.1
300 21.2 3.7 7.3 11.0 21.2
450 31.7 5.5 10.9 16.4 31.7
600 42.3 7.3 14.6 21.9 42.3

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100

*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09773
41A 07721 O-Ring 6
43 04373 Guide Ring 3
44 06828 Support Ring 6
44A 06826 Spiral Ring 6
Valve Assembly Kit – Part #09562
51A 06832 Inlet Valve Seat 3
51B/52B 06831 Valve Plate 6
51C/52C 07732-0100 Valve Spring 6
51D/52D 06830 Spring Tension Cap 6
51E/52E 06829 Gasket for Valve 6
51F/52F 12055 O-Ring 6
52A 06833 Discharge Valve Seat 3
57 07740 O-Ring 3
Oil Seal Kit – Part #09560
32 06117 Radial Shaft Seal 6
33A 07721 O-Ring 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.