This is a pressure-actuated regulator that is designed for any that fits within the flow and pressure range of the regulator. The regulator determines the direction of the flow in the system and maintains system pressure via an adjustable hand-wheel that controls the amount of tension on a pressure spring. When the water flow stops, it is diverted through the bypass port at virtually no pressure. The regulator is capable of handling one or more shut-off guns and should be run with no bypass (if the full flow from the pump is going through the regulator). It actuates at around 10% above the system pressure.
WARNING: This product might contain a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|Maximum Flow||26.4 GPM||99 L/min|
|Max Pressure||4060 PSI||280 bar|
|Temperature Rating||158 °F||70 °C|
|Inlet Port||3/4" FNPT|
|Outlet Port||3/4" FNPT|
|Bypass Port||3/4" BSP|
|Weight||6.7 lbs.||3 kg|
|Repair Kit – Part #09461|
|6||12204||O-Ring, Valve Stem||1|
|7||12205||Back Up Ring, Valve Stem||1|
|10||05015||Back Up Ring, 28MM||1|
|14D||06017-0100||Spring, Outlet Valve||1|
For 50 years, Giant Pumps has offered the most dependable positive displacement high-pressure triplex pumps available. Designed and built to the highest quality standards, customers count on Giant Pumps products to keep their equipment running. Every design detail of Giant Pumps products is optimized for long-life and reliable performance, making Giant Pumps the most trusted name in high-pressure pumps and systems.