22948R

This is a pressure-actuated regulator that is designed for any that fits within the flow and pressure range of the regulator.  The regulator determines the direction of the flow in the system and maintains system pressure via an adjustable nut that controls the amount of tension on a pressure spring.  When the water flow stops, it is diverted through the bypass port at virtually no pressure.  The regulator is capable of handling one or more shut-off guns and should be run with no bypass (if the full flow from the pump is going through the regulator).  It actuates at around 10% above the system pressure.

  • Giant Industries Limited Warranty

SPECIFICATIONS

U.S. Metric
Flow 60 GPM 227 L/min
Pressure (Maximum) 1600 PSI 110 bar
Continuous Temperature 160 ºF 70 ºC
Inlet 1″ FNPT
Outlet 1″ FNPT
Bypass 1″ BSP
Weight 17.5 lbs 8.0 kg
Materials Brass

REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Repair Kit – Part #12082
4 12045 Spring, Discharge Valve 1
4A 12118 Spring, Inlet Valve 1
5 12046-0100 Ball Valve, Inlet 1
6 06733 Valve, Discharge 1
11 06577 O-Ring 3
12 12056 Support Ring 2
13 12057-0001 O-Ring, Discharge Valve Seat 1
14 06736 O-ring 2
17 12283 Packing 1
19A 22618 O-Ring, Valve Stem 1
19B 12064 Spacer, Valve Stem 1
19D 12066 Tension Sleeve 1
Small Repair Kit – Part#09619
11 06577 O-Ring 3
12 12056 Support Ring 2
13 12057-0001 O-Ring, Discharge Valve Seat 1
14 06736 O-Ring 2
17 12283 Packing 1
19A 22618 O-Ring, Valve Stem 1
19D 12066 Tension Sleeve 1

 

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

ACCESSORIES
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.