An American-made triplex plunger positive displacement pump with reciprocating plungers for direct or belt drive applications.
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; high temperature nitrile seals (with fabric reinforcing); stainless steel valves; and forged brass manifold.
Gearbox and bell housings (to connect to gasoline, diesel, electric or hydraulic drive) and couplers (aluminum or Delrin).
|Flow||4.7 GPM||17.8 L/min|
|Max Pressure||2000 PSI||140 bar|
|Max Pressure Intermittent||2500 PSI||175 bar|
|Weight||11.7 lbs.||5.3 kg|
|Max Temperature||160 ºF||71 ºC|
|Inlet Ports||(2) 1/2″ BSP|
|Discharge Ports||(2) 3/8″ BSP|
|Shaft Rotation||Top of pulley Towards Manifold|
|Crankshaft Diameter||24 mm|
|Key Width||0.31″||8 mm|
|Shaft Mounting||Either Side|
|Crankcase Oil Capacity||7.5 fl. oz.||0.22 Liters|
|Extended Crankcase Oil Capacity||9.0 fl. oz.||0.27 Liters|
|Key Component Material|
|Plungers||Solid Ceramic Oxide|
|Seals||Nitrile With Fabric Reinforcing|
|RPM||GPM||1000 PSI||1500 PSI||2000 PSI||2500 PSI*|
|* Intermittent duty only|
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
|High Temp Plunger Packing Kit – Part #09599|
|+ Kit contains six (6) pressure rings. Only three (3) are required for the P200 Series Pumps|
|Valve Assembly Kit – Part #09116|
|32x||07946A||Valve Assembly Complete||6|
|Oil Seal Kit – Part #09144|
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.