
LP350
A German-made reciprocating triplex plunger pump.
Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; nitrile seals with fabric reinforcing; stainless steel valves and cast aluminum bronze manifold.
View Manual
-
Share
Request Info
How to Order

WARNING: This product might contain a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
SPECIFICATIONS
U.S. | Metric | |
---|---|---|
Flow | 22.6 GPM | 85.6 L/min |
Maximum Discharge Pressure | 2300 PSI | 160 bar |
Max Speed | 1000 RPM | |
Maximum Inlet Pressure | 145 PSI | 10 bar |
Max Temp @ 1000 RPM | 140 °F | 60 °C |
Max Temp @ 500 RPM | 160 °F | 70 °C |
Plunger Diameter | 1.18″ | 30 mm |
Stroke | 1.65″ | 42 mm |
Crankshaft Diameter | 35 mm | |
Crankshaft Rotation | Top of Pulley Towards Manifold | |
Crankshaft Mounting | Either Side | |
Inlet Ports | (2) 1-1/4″ BSP | |
Discharge Ports | (2) 1″ BSP | |
Crankcase Oil Capacity | 95 fl. oz. | 3.0 L |
Weight | 110 lbs. | 50 kg |
Key Component Material | ||
Manifold | Aluminum Bronze | |
Plungers | Solid Ceramic Oxide | |
Valves | Stainless Steel | |
Seals | Nitrile With Fabric Reinforcing | |
Gear End | Spheroidal Cast Iron |
HORSEPOWER SPECIFICATIONS
RPM | GPM | 500 PSI | 1000 PSI | 2000 PSI | 2300 PSI |
---|---|---|---|---|---|
500 | 11.3 | 3.9 | 7.8 | 15.7 | 18.0 |
640 | 14.5 | 5.0 | 10.0 | 20.1 | 23.1 |
750 | 16.9 | 5.9 | 11.8 | 23.5 | 27.1 |
805 | 18.2 | 6.3 | 12.6 | 25.3 | 29.0 |
865 | 19.5 | 6.8 | 13.6 | 27.1 | 31.2 |
940 | 21.2 | 7.4 | 14.7 | 29.5 | 33.9 |
1000 | 22.6 | 7.8 | 15.7 | 31.4 | 36.1 |
Horsepower Requirements
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
REPAIR KITS
ITEM# | PART# | DESCRIPTION | Qty. |
---|---|---|---|
Plunger Packing Kit – Part #09546 | |||
38 | 07700 | O-Ring | 6 |
40 | 13016 | V-Sleeve | 6 |
Valve Assembly Kit – Part #09196 | |||
44A | 07150 | O-Ring | 6 |
44B | 06266 | Support Ring | 3 |
46A | 07064 | Valve Seat | 3 |
46B | 07063 | Valve Plate | 3 |
46C | 07750-0100 | Valve Spring | 3 |
Oil Seal Kit – Part #09577 | |||
31 | 07133 | Oil Seal | 3 |
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.