GP6132-4000

A German-made reciprocating triplex plunger pump.

Features
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; stainless plungers with hardened metal coating; nitrile with fabric reinforcing; stainless steel valves; machined stainless steel manifold.

SPECIFICATIONS

U.S. Metric
800 RPM
Flow 23.5 GPM 88.9  L/min
Pressure (Continuous) 3045 PSI 210 bar
Pressure (Intermittent) 0 PSI 0 bar
Common Specifications
Plunger Diameter 1.26″ 32 mm
Stroke 1.89″ 48 mm
Max. Temperature of Pumped Fluids 140 ºF 60 ºC
Inlet Ports (2) 1 1/4″ BSP
Discharge Ports (2) 2 1/2″ BSP
Shaft Rotation Top of Pulley
Crankshaft Diameter 42 mm
Key Width 1.65″ 42 mm
Shaft Mounting Either Side
Weight 309 lbs. 140 kg
Crankcase Oil Capacity 1.1 Gal 4.2  Liters
Key Component Material
Manifold Stainless Steel
Plungers Solid Ceramic Oxide
Valves Duplex Steel
Seals Nitrile With Fabric Reinforcing
Gear End Spheroidal Cast Iron

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 1000 PSI 1500 PSI 2500 PSI 3045 PSI
400 11.8 8.1 12.2 20.3 24.7
500 14.7 101 15.2 25.3 30.8
600 17.6 12.2 18.2 30.4 37.0
700 20.6 14.2 21.3 35.5 43.2
800 23.5 16.2 24.3 40.5 49.4

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:

Electric HP = (GPM X PSI)/1450

Gas HP = (GPM X PSI)/1100

*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09319
41A 07721 O-Ring 3
41B 13223 Support Ring 3
41C 12055 O-Ring 6
41D 07693 Support Ring 6
44 06096 Sleeve 6
45 13360 Leakage Seal 3
Valve Assembly Kit – Part #09320
51A 12564 Valve Seat 6
51B 12565 Valve Plate 6
51C 12566 Valve Spring 6
52 05166 O-Ring 6
57 05167 O-Ring 3
Oil Seal Kit – Part #09304
32 06118 Radial Shaft Seal 3
32A 13215 Grooved Ring 3
33A 07721 O-Ring 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.