A German-made reciprocating triplex plunger pump for bentonite applications.
Spheroidal cast iron crankcase with vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; special seals with fabric reinforcing; stainless steel valves and nickel-plated spheroidal cast iron manifold. Comes equipped with an integrated oil cooling system.
|Flow||132 GPM||500 L/min|
|Maximum Pressure||1500 PSI||100 bar|
|Crankshaft Speed||520 RPM|
|Power Consumption||129 BHP||96 kw|
|Maximum Inlet Pressure||90 PSI||6.2 bar|
|Maximum Temperature||140 ºF||60 ºC|
|Plunger Diameter||2.99″||76 mm|
|Crankshaft Diameter||70 mm|
|Crankshaft Rotation||Top of pulley towards manifold|
|Key Width||14 mm|
|Crankshaft Mounting||Either Side|
|Inlet Ports||(2) 3″ BSP|
|Discharge Ports||(2) 1-1/2 BSP|
|Crankcase Oil Capacity||1.6 gal||6 Liters|
|Weight||738 lbs.||335 kg|
|Key Component Material|
|Manifold||Spheroidal Cast Iron|
|Plungers||Solid Ceramic Oxide|
|Seals||Nitrile With Fabric Reinforcing|
|Gear End||Spheroidal Cast Iron|
|RPM||GPM||500 PSI||1000 PSI||1250 PSI||1500 PSI|
The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
Gas HP = (GPM X PSI)/1100
*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.
Repair Kits Available
The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.