SP100W

A German-made reciprocating triplex plunger pump.

Features:
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; nitrile seals (with fabric reinforcing); stainless steel valves and forged brass manifold.

  • SP100W Exploded View
  • SP100W Parts List
  • Giant Industries Limited Warranty
  • SP100W Installation Instructions
  • SP100W Repair Instructions
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Flow 11.2 GPM 42 L/min
Pressure 2000 PSI 140 bar
Maximum Speed 1420 RPM
Plunger Diameter 1.02″ 26 mm
Stroke 0.79″ 20 mm
Max. Temperature of Pumped Fluids 160 ºF 71 ºC
Inlet Ports (2) 3/4″ NPT
Discharge Ports (2) 3/8″ NPT
Shaft Rotation Top of Pulley Towards Manifold
Shaft Mounting Either Side
Weight 41.9 lbs. 19 kg
Crankcase Oil Capacity 24 fl. oz. 0.71 L

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 1200 PSI 1500 PSI 1900 PSI 2000 PSI
700 5.5 4.5 5.7 7.2 7.5
800 6.3 5.2 6.5 8.2 8.6
900 7.1 5.8 7.3 9.2 9.7
950 7.5 6.1 7.7 9.7 10.2
1000 7.9 6.5 8.1 10.2 10.8
1200 9.4 7.7 9.7 12.3 12.9
1300 10.2 8.4 10.5 13.3 14.0
1420 11.2 9.2 11.5 14.5

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100


*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09077
31 07336 V-Sleeve 3
Ceramic Plunger Kit – Part #09079
24 07360 Bolt Assembly 3
24A 07346 Ceramic Plunger 3
25 07317 Flinger 3
Weep Repair Kit – Part #09075
49 07344 O-Ring, Weep Return Plate 1
50 07336 Seal, Weep Return 3
Inlet Valve Kit – Part #09069
34A 07326-0100 Inlet Spring Retainer 3
35 06970 Valve Spring 3
36 07327 Valve Plate 3
37 06014 Valve Seat 3
38 06015 O-Ring, Valve Seat 3
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
Discharge Valve Kit – Part #09068
34 07325-0100 Discharge Spring Retainer 3
35 06970 Valve Spring 3
36 07327 Valve Plate 3
37 06014 Valve Seat 3
38 06015 O-Ring, Valve Seat 3
44 07214 O-Ring, Discharge Plug 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.