SP100HK

A German-made reciprocating triplex plunger pump for high temperature applications.

Features:
Aluminum crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; high temperature nitrile seals (with fabric reinforcing); stainless steel valves and forged brass manifold.

  • SP100HK Exploded View
  • SP100HK Parts List
  • SP100HK Torque Specifications
  • Giant Industries Limited Warranty
  • SP100HK Installation Instructions
  • SP100HK Repair Instructions
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Max Flow 11.2 GPM 42 L/min
Max Discharge Pressure 2000 PSI 140 bar
Max Speed 1420 RPM
Plunger Diameter 1.02″ 26 mm
Stroke 0.79″ 20 mm
Crankcase Oil Capacity 24 fl. oz. 710 mL
Weight 41.9 lbs. 19 kg
Inlet Ports (2) 3/4″ NPT
Discharge Ports (2) 3/8″ NPT
Shaft Rotation Top of Pulley Towards Manifold
Shaft Mounting Either Side

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 1200 PSI 1500 PSI 1900 PSI 2000 PSI
700 5.5 4.5 5.7 7.2 7.5
800 6.3 5.2 6.5 8.2 8.6
900 7.1 5.8 7.3 9.2 9.7
950 7.5 6.1 7.7 9.7 10.2
1000 7.9 6.5 8.1 10.2 10.8
1200 9.4 7.7 9.7 12.3 12.9
1300 10.2 8.4 10.2 13.3 14.0
1450 11.2 9.2 11.2 14.5

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:
Electric HP = (GPM X PSI)/1450
as HP = (GPM X PSI)/1100


*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09077-HK
31 07336 V-Sleeve 3
31A 11503 V-Sleeve 3
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
49 07344 O-Ring, Weep Plate 1
50 11503 V-Sleeve 3
Complete Valve Kit – Part #09814
34 07325 Discharge Spring Retainer 3
34A 07326-0100 Inlet Spring Retainer 3
35 07312-0100 Valve Spring 6
36 07327 Valve Plate 6
37 06014 Valve Seat 6
38 06015 O-Ring, Valve Seat 6
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
44 07214 O-Ring, SP100W(HK)/SP200W 3
44 07035 O-Ring, SP351W 3
Inlet Valve Kit – Part #09069
34A 07326-0100 Inlet Spring Retainer 3
35 07312-0100 Valve Spring 3
36 07327 Valve Plate 3
37 06014 Valve Seat 3
38 06015 O-Ring, Valve Seat 3
40 12057 O-Ring, Inlet Valve Retainer 3
42 07332 O-Ring, Inlet Plug 3
Discharge Valve Kit – Part #09068
34 07325-0100 Spring Retainer, Discharge 3
35 07312-0100 Valve Spring 3
36 07327 Valve Plate 3
37 06014 Valve Seat 3
38 06015 O-Ring, Valve Seat 3
44 07214 O-Ring, SP100W(HK)/SP200W 3
44 07035 O-RIng, SP351W 3
Oil Seal Kit – Part #09068
26 07318 Radial Shaft Seal 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.