BP7170

A German-made reciprocating triplex plunger pump for bentonite applications.

Features:
Spheroidal cast iron crankcase with sight glass and vented dipstick; forged, through-hardened, ground and polished crankshaft; bronze connecting rods; hardened stainless steel plunger bases; solid ceramic plungers; rope packing; stainless steel valves and spheroidal cast iron manifold.

  • BP7170 Exploded View
  • BP7170 Parts List
  • BP7170 Torque Specifications
  • Giant Industries Limited Warranty
  • BP7170 Installation Instructions
  • BP7170 Repair Instructions
  • Troubleshooting Guide

SPECIFICATIONS

U.S. Metric
Flow 148 GPM 560 L/min
Maximum Pressure 1015 PSI 70 bar
Crankshaft Speed 560 RPM
Maximum Inlet Pressure 145 PSI 10 bar
Maximum Temperature 140 ºF 60 ºC
Plunger Diameter 2.76″ 70 mm
Stroke 2.05″ 52 mm
Crankshaft Diameter 48 mm
Shaft Rotation Top of Pulley Towards Manifold
Key Width 0.55″ 14 mm
Crankshaft Mounting Either Side
Inlet Ports (2) 2-1/2″ BSP
Discharge Ports (2) 1-1/4″ BSP
Crankcase Oil Capacity 1.6 gal. 6.0 L
Weight 423 lbs. 191 kg
Mechanical Efficiency @ 700 RPM 0.83
Volumetric Efficiency @ 700 RPM 0.95
Key Component Material
Manifold Cast Iron
Plungers Solid Ceramic Oxide
Valves Stainless Steel
Seals Nitrile With Fabric Reinforcing
Gear End Spheroidal Cast Iron

Click the image to enlarge


HORSEPOWER SPECIFICATIONS

RPM GPM 500 PSI 700 PSI 900 PSI 1015 PSI
300 79.3 27.3 38.3 49.2 55.5
400 105.7 36.5 51.0 65.6 74.0
500 132.1 45.6 63.8 82.0 92.5
560 148 51.0 71.5 91.9 103.6

Horsepower Requirements

The ratings shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements use the following formulas:

Electric HP = (GPM X PSI)/1450

as HP = (GPM X PSI)/1100

*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.


REPAIR KITS

ITEM# PART# DESCRIPTION Qty.
Plunger Packing Kit – Part #09558
38A 06667 O-Ring 6
41 06670 Spiral Ring 6
42 06671 Support Ring 3
Valve Assembly Kit – Part #09559
51A 04704 Valve Seat, Inlet 3
51B 05408 O-Ring 3
51C/52C 06678 Valve Plate 6
51D/52C 0773-0100 Valve Spring 6
51E/52E 06679 Spacer Pipe 6
51F/52F 06680 Ring for Valve 6
52A 04705 Valve Seat, Discharge 3
52B 05818 O-Ring 3
52G 05408 O-Ring 3
56A 07658 O-Ring 3
56B 07635 Support Ring 3
Oil Seal Kit – Part #09557
32 07624 Radial Shaft Seal 3
33A 13286 O-Ring 3

Repair Kits Available

The repair kits listed to the right are available for this pump. If you need further information about these repair kits, or have questions about other specific parts for your pump, please contact you local Giant distributor or contact Giant customer service.

PUMP CATEGORIES:
Service & Repair

Giant provides service on each pump and accessory that we sell. Many basic repair procedures are covered in the Giant repair manual. For all other questions on service or repair needs please contact your local Giant distributor.